AngerManagement wrote:
E61 wrote:
I see David from Breville has joined us - Welcome David! Please - No teasing about the new machine! ;D We want the low down now - specs, price, boiler material (brass or stainless) and to finally squash the rumours once and for all that the new machine will be called the "Bliss" 😉
There is enough over the WEB, Twitter and FaceBook as to the new machine, but is there a handshake; as to who gets an inside running :🙂 Or as usual; Australia gets told one thing and then when released / on show OS, the grape vine is faster and more precise with a corrected update 8) Either way, all the conjecture is positive from a marketing point of view 😃
Couple of points. Firstly, hi. Secondly, we can't pretend all is positive on the site, but so be it. When we sell toys, those in the know deserve to grade us poorly. Thirdly, AM, Breville is a Sydney based company. We don't take the lead from a multi-national corporate, we run our own race. The 240v variant will be the first released, however saying that the 110v (USA) won't be far behind. The temp consistency has been achieved off of 1800watts so it's essentially the same machine with a different plug on it. But Aus consumers will see it first. Fourthly, I made a mistake on CS. The machine will be at SCAA, however will not be at the show itself and will be shown under NDA's. 5ly, we are trying to keep a few secrets to ourselves until the launch on the17th. But it's proving difficult with the breadth of people that have seen it so far. .....ly, it's all turned into a bit of a game, which was not the intention. We're still tweaking PP's and are still achieving the temp results and have improved steam again over the past week. All will be revealed on the 17th. But to be honest, I'm sure someone will let the cat out of the bag before. Lastly, it will not be called the bliss. Lastly, we'll not be promoting "no heat up time". The "bling" of a actively heated group head was not designed as bling. We simply laid down a super tight performance tolerance to the designers, so the AHGH, was deemed just as important as pid's, non-thermoblocketc etc, in achieving those tolerances.
