Wooden and SS Group Handles.

shape_shifter

We don't know that yet either AM, answer though - sure, whatever works best for you 🙂

Kelsey

AngerManagement wrote:

The group handle you have is a Mango, was it not ?

You tell me!! 😃 I'll see what I can do about unscrewing it - it almost looks like it's on a ball within the handle, but haven't looked to closely just yet. BTW - Auspost says the other PF was delivered, did it make it ok?

Koffee_Kosmo

I have completed my wooden handle for the naked filter AM gifted me another wooden handle but I needed to finish it by fitting the threaded stud Yesterday I drilled the correct size hole and glued it in - leaving it over night to harden All stages are photographed and posted KK

Koffee_Kosmo

AM I was speaking to a relative and he said that he can get some iron bark with red heart wood So I told him I will take all he has - and pass it on to you KK

Koffee_Kosmo

A rough drawing of my design Length I favour for best fulcrum min 18mm max 200mm KK

Koffee_Kosmo

Anger Management wrote:

Are so you want a Slayer type handle... Have 3 already done... in that stuff that D: keeps talking about that makes good decking.. Sorry, memory is fruited. PS: What size thread ? How long the handle ? How long is the exposed thread ?

Normal Bezzera thread 12mm Added revised Drawing with length on above post KK

Koffee_Kosmo

The idea is close to what you have done in the past My design - Just has more emphasis on the cone end KK

Koffee_Kosmo

I just had to share I took a snapshot of some of AMs finished lathe turned handles Which ones do you like ? Same photo shown with and without flash KK

shape_shifter

I like top left, second right, second last right 🙂

Jonty

Top left for me.

Kelsey

Bottom left is my favourite. Would match the current AM-fashioned works of art that adorn my machine,

eggbert

I wish I had the artistic skill in me to be able to do something like this, or the space / money available for a lather to turn them on. I would love wooden handles on my Bezzera.

Koffee_Kosmo

eggbert wrote:

I wish I had the artistic skill in me to be able to do something like this, or the space / money available for a lather to turn them on. I would love wooden handles on my Bezzera.

The ones pictured above are now at Sponsor Barazi The tradesman has left them with Barazi to sell and recoup costs KK

Koffee_Kosmo

Koffee Kosmo wrote:

The ones pictured above are now at Sponsor Barazi The tradesman has left them with Barazi to sell and recoup costs KK

I should add that Crema member Derallex makes or may have some sets made from Resin See here -- http://www.bestcafes.com.au/forum/accessories/custom-resin-handles/msg32867/#msg32867 KK

derrilex

Nope. 😃, just what is out there around the traps for yourself, Brett and me

Brett_H

derrilex wrote:

Nope. 😃, just what is out there around the traps for yourself, Brett and me

And they are the icing on my machine cake... So to speak! Best mod I've ever had done for a machine!!

derrilex

:thumb:

« Previous Page Next Page »