derrilex Welcome Gouly. :thumb: How come he gets the flash agitator and you give me the funny one ? :rofl:
Koffee_Kosmo derrilex wrote: Welcome Gouly. :thumb: How come he gets the flash agitator and you give me the funny one ? :rofl: Three reasons 1) It's to big for your roaster insert 2) It's set up to lock onto the perforated insert ( yours is inverted ) 3) You are driving your roaster clockwise and it's my set up is anti clockwise KK
Koffee_Kosmo Prior to finishing the next step all items were mocked up for good fit Then all attached items were removed and the MDF was sealed before final fitting as seen below Next step is to connect the 12volt wiring and connector All nice and neat :thumb: [attachimg=1] [attachimg=2]
Koffee_Kosmo Maiden roast of Gouly's roaster 700 grams of Colombian Bachue 18 [attachimg=1] Great results to second crack [attachimg=2] And the chaff collection works as it should [attachimg=3]
Koffee_Kosmo Brett H wrote: Kudos Gouly on the new roaster. As always Paul... We are in awe of your talents. My hope for this thread is to inspire others to build a KKTO roaster YES - Some DIY skills are needed however once built, one will have a great roaster design that will just roast beautifully thousands of times for its maker KK
Trooper Thanks Derrilex, Paul did a fantastic job, ^-^ I hope one day, I can roast coffee 1/4 as good as he can. :🙂
Koffee_Kosmo Gouly wrote: Thanks Derrilex, Paul did a fantastic job, ^-^ I hope one day, I can roast coffee 1/4 as good as he can. :🙂 You don't need to do anything - just let the roaster do the job Easy - just load green beans and cool beans when done Then enjoy KK
derrilex Saw it in action today. Goes very nicely despite and older element type TO. A new halogen unit and Gouly will be roasting like a, well, trooper 😃
Trooper Yes very impressive, I am like a little kid with a new toy, I can't stop looking at it. Thanks for your valued information today derrilex. What was that brand of halogen cooker again thanks. :question:
Koffee_Kosmo Gouly wrote: Yes very impressive, I am like a little kid with a new toy, I can't stop looking at it. Thanks for your valued information today derrilex. What was that brand of halogen cooker again thanks. :question: Not sure if you will find this brand Highlander You can also get well priced Turbo ovens at - Homeart Aldi Online from various vendors They are mostly halogen and shine a light on the roast when it cycles on KK
Koffee_Kosmo I have started another KKTO build & Bean Cooler for an enthusiast Today I completed the cooler I used a 13 lt bucket as the HELLER brand exhaust fan fitted snugly Holes drilled for exhaust and opposite the power cord entry [attachimg=1] I used a wash basin and cut the bottom out for the sift unit to fit into it [attachimg=2] The fully assembled unit [attachimg=3] During the build I will post photos as it's happening as there will be a few small changes with the base and I will make a wire type agitator KK
eggbert Where's the sift unit from KK, and what is it made out of? Looks a bit plasticy - is it alright with beans in contact at 200C+ temps? Cheers.
