Bezzera Strega Lever machine 2 Year Review

lukemc

Koffee Kosmo wrote:

Believe it or not - I have never done it on the Strega I do however clean the brew head area under the screen regularly KK

I'm the same KK. I was getting worried I should have by now, I think I read on one of the US forums someone suggesting monthly but I think I'll wait and if it gets squeaky then I'll look at it.

Lacehim

If it's not broke don't go looking for things to fix IMO. They should see years of service before needing changed.

borat123

Koffee Kosmo wrote:

Still on its original group head seal

Geez KK, that's a good effort. On the Urania I change mine out every 2 or 3 months, and lube the piston about every 3-4 months. Mine is also used for daily coffees at home but stays on 24/7 unless the house is empty or it needs some maintenance... I last bought a bag of 20 from a catering supply place in Ireland for about 29 cents each!

Koffee_Kosmo

Next in the series of maintaining your Bezzera Strega Lever and other lever machines in general Lever machines don't require chemical back flushing but benefit from daily hot water flushes or a cleansing flush after making coffee My general routine is to remove the shower screen and seal assembly to clean it thoroughly On the Strega it's fairly easy using a thin spoon or one can also use a screwdriver carefully The screen and seal come out in one piece [attachimg=1] [attachimg=2] Separate and wash thoroughly [attachimg=3] [attachimg=4]

Koffee_Kosmo

Wipe inside the water dispersion area to remove oils and grinds prior to replacing the screen and seal [attachimg=3] Do the same cleaning procedures for the group handle and basket [attachimg=1] Add a little lube on the seal and replace I have found that the easiest way to replace, is to place the water screen and seal onto the group handle and lock it in just like one normally makes coffee [attachimg=2]

derrilex

Wow KK, look at that handle ! 😃

Trooper

Where did you purchase the Glare Ultra 2000 Advance from KK

Koffee_Kosmo

Gouly wrote:

Where did you purchase the Glare Ultra 2000 Advance from KK

I got it online but it's expensive It's a paint protection system that lasts 7 years Originally purchased to give the family cars a paint service The same polish system was used on my handles as we'll and they also look great I am running low on it now but If you need a little amount of polish you can have some

derrilex wrote:

Wow KK, look at that handle ! 😃

Still Beautiful after a couple of years

Brett_H

Sure the handle is quite nice but mine's better 😛

Koffee_Kosmo

Brett H wrote:

Sure the handle is quite nice but mine's better 😛

Your handle and all the handles that Derrilex has made were polished with the Glassplexin polish I gifted him :stir KK

Brett_H

It looks just as good as the day I picked it up! Superb product and a superb craftsman!!

derrilex

Brett H wrote:

It looks just as good as the day I picked it up! Superb product and a superb craftsman!!

Too kind Brett.

« Previous Page