Handgrinders

hazbean

On the Spong subject again, following my post #17 in this thread, where I said that I'd installed a Spong No 2 to replace the No 1 we had been using for syphon etc. It's still there. After fixing the No 1 (above), I ran them both for a while. Can't pick the difference in grinds produced, but can definitely confirm that the No 2 is easier to use in terms of effort, and quicker (not that the No 1 is bad though). The one comparative disadvantage I've noticed is that the No 2 has greater unavoidable grind retention. With the No 1 I can get pretty well everything through with a bit of reverse rotation and a bit of a thump. The No 2 will hang on to more and not release it until quite a bit later.

Brett H

Where do you come across this stuff AM? 

shape_shifter

Brett the Spongs are around you just have to be lucky enough to win one, they go for quite a bit these days on ebay. I still haven't got the EM0480 working so I'm still using the Spong for everything.

Brett H

on 1317897514:

Brett the Spongs are around you just have to be lucky enough to win one, they go for quite a bit these days on ebay. I still haven't got the EM0480 working so I'm still using the Spong for everything.

I'm blown away that an heirloom hand grinder has the goods for espresso!  How long does it take for a double?

Brett H

That looks superb! 

Lacehim

on 1317888837:

I now have a #1 and # 2 all complete with org trays.. I need another garage  ;D

You don't need another garage AM, just let me have one!   I've been looking for ages... they are bloody hard to pickup!

Lacehim

Anyone from here buy that spong #3 off ebay.  went for over $130+postage.  Too pricey for me.

Brett H

on 1318324166:

Anyone from here buy that spong #3 off ebay.  went for over $130+postage.  Too pricey for me.

Crikey.., that's within spitting distance of a Smart Grinder!  Are they truly worth that???

RichardM

So despite all the spongtitis that shape_shifter has been spreading, I ordered a porlex from Ministry Grounds this morning to go with my aeropress.

Kelsey

I'll be interested in your results with this grinder!

RichardM

on 1325290705:

I'll be interested in your results with this grinder!

Sorry it has been so long to post this, but I haven't really used it beyond initial testing to make sure it worked. First time away from home last night since I got it, ground up enough to make 3 x doubles in the aeropress for some long blacks. Grinds were very consistent, and very clean in the cup. I mean, what more can I say? It was easy to grind, as far as hand grinders go, and the grinds didn't get too hot. All in all, SUPER happy with it. Porlex + Aeropress w coava disc + 250g coffee = perfect travel kit.

Jonty

I brought a porlex a few weeks back as I've been roasting and have no grinder.  I've been using mine on a daily basis at home & at work.  Very impressed with build, adjustment and what I can get out of the machines I use. Purchased mine through presso australia and if your a member of the other forum, check their link as you will get a 15% discount.  Dont believe any of the crema forum sponsors carry the porlex. Jonty

beanflying

So pleased you got your first grinder - so much better than preground  :stir At home I normally still use the Kyocera which is much the same as the Porlex quality for $$ beats any electric one until $400'ish

RichardM

on 1328312277:

Dont believe any of the crema forum sponsors carry the porlex. Jonty

They do. I got mine from Ministry grounds at a good price.

UNM

Could be wrong, but I think ministry grounds are actually cheaper than presso, even after the CS discount.

Jonty

Not going to start a p&*sing competition because I have utmost respect for all coffee sponsors regardless of forum and to date have brought over 10kg of green beans from Brendan due to this forum. I will spend some coins at MG soon and also with Jeff at MyCuppa.  I actually need to refrain from spending as it is eating my savings for the machine/grinder I desire. For the record I paid $63 for the porlex unit and $5 freight.

Lacehim

I'm thinking of buying an aeropress from ministry grounds, they got a bundle there that seems well priced, the Aeropress, disk and grinder. What to go for grinder wise though? Kyocera Ceramic Hand Grinder CM-45CF  +$69.30 Hario Mini Mill Hand Grinder  +$49.50 Porlex Hand Grinder  +$58.50 Hario Skerton Ceramic Hand Grinder  +$64.80 Any suggestions.  I would also like to use it with the lusso just to try.  Not sure how many turns would be involved in that though.

RichardM

on 1334732603:

I'm thinking of buying an aeropress from ministry grounds, they got a bundle there that seems well priced, the Aeropress, disk and grinder. What to go for grinder wise though? Kyocera Ceramic Hand Grinder CM-45CF  +$69.30 Hario Mini Mill Hand Grinder  +$49.50 Porlex Hand Grinder  +$58.50 Hario Skerton Ceramic Hand Grinder  +$64.80 Any suggestions.  I would also like to use it with the lusso just to try.  Not sure how many turns would be involved in that though.

I decided on the porlex and Im happy. I think you'd be happy with any of them though tbh. Porlex fits really nicely into the aeropress barrel.

beanflying

Unless you have huge hands for get the skeleton (hard to hold) all the rest are within a gnats whisker of being the same and deliver a nice result at espresso/aeropress grind. At home I normally use my Kyocera and don't have an electric grinder on the bench in spite of owning 6 (recount 8 of them)  ;D If you want one for plunger/syphon then they get more than a little inconsistent so look at a Zass or similar upper and lower supported burrset.

Rider

Hand grinder....  :laugh:  :laugh:  :laugh:  :laugh:  :laugh:

UNM

The porlex is a good match to an aeropress. Can't say about the rest. Also porlex is stainless and is as difficult to break as the aeropress - so a good travel companion. I suspect they all share the same burrs and it is more a matter of style and practicality for your user environment. Mine was a real bargain, but only because I got it on a trip to the UK - the UK Peso is not worth much these days. Edit: Oh and re: spong, nice but too expensive. I bid on one recently, but it went out of my price range pretty quick

Seeya Latte

on 1334732603:

I'm thinking of buying an aeropress from ministry grounds, they got a bundle there that seems well priced, the Aeropress, disk and grinder. What to go for grinder wise though? Kyocera Ceramic Hand Grinder CM-45CF  +$69.30 Hario Mini Mill Hand Grinder  +$49.50 Porlex Hand Grinder  +$58.50 Hario Skerton Ceramic Hand Grinder  +$64.80 Any suggestions.  I would also like to use it with the lusso just to try.  Not sure how many turns would be involved in that though.

Good thread! the info is welcomed and timely,  because lately I've been considering getting a handgrinder primarily for travel (to go with my Aeropress / Bellman). This list of handgrinders looks promising - all fit my budget of $60 or so - and all look like they're around the same mark in both price, performance & quality (Porlex slightly in front - maybe it's a stainless thing). I'm also thinking Handpresso or Mypressi but that's another discussion

Beanz

I have used a Kyocera for several years now in conjunctuion with the Aeropress and a Bacchi. Very happy with the results. It is small and robust. It will not bend or break if being packed in luggage or back packs, I use it when travelling interstate / overseas and on camping trips. It also gets used at home. A good all round grinder. A high quality product.

galumay

I have had a Pharos for a while (its number 001) and now I have added a Lido to the collection for travelling and the AeroPress. I love both of them.

beanflying

Gorgeous - that is all for now  :thumb:

lemoo

oh wow, what is that bf?

Brett H

on 1341020161:

oh wow, what is that bf?

+ like a million  :thumb:

beanflying

Hand made 1 off at this stage from Canada by Yvan Marcoux. From the french translation of the article it was a few steps away from being where he wanted it to be so if and when it goes into production is unclear. The article was a general one of 3 coffee drinkers not on the grinder as such. Lovely pseudo homage to Starck's juicer and would look great on my kitchen bench  :thumb:

Brett H

Wow, I really don't want a hand grinder like... Ever...BUT.  :thumb:

derrilex

Wow, now that looks good. I shudder to think how much it would be ???