ECM Synchronika

Comments

• readeral

  July 2017

  For mounting the drain kit? Sent from my iPhone using Tapatalk

  Share on Facebook
• K_Bean_Coffee

  July 2017

  on 1501232862:

  For mounting the drain kit?

  That was my first thought Al. ...but the position and shapes don't make sense for that. It's a mystery .... Maybe someone at the factory likes circles

  Share on Facebook
• readeral

  July 2017

  It's not for routing tubes then? Sent from my iPhone using Tapatalk

  Share on Facebook
• _maatt_

  July 2017

  On mine the chassis is symmetrical L-R. Friday afternoon unit? [emoji848] Sent from my SM-G950F using Tapatalk

  Share on Facebook
• Simon

  July 2017

  Secret beverage holder? [emoji6] Sent from my SM-A520F using Tapatalk

  Share on Facebook
• K_Bean_Coffee

  July 2017

  on 1501234259:

  On mine the chassis is symmetrical L-R. Friday afternoon unit? [emoji848]

  That's what I thought Matt. They're usually symmetrical I was sure... Must have been a Friday beer o'clock unit.

  Share on Facebook
• K_Bean_Coffee

  July 2017

  on 1501235349:

  Secret beverage holder? [emoji6]

  Maybe Simon. I noticed when changing the shower screen to a precision one and by coincidence the big cut out was almost identical in size to the screen. So spare showerscreen holder perhaps?

  Share on Facebook
• madaxle

  July 2017

  its for the blind filter basket  :rofl: :rofl: :rofl: :rofl:

  Share on Facebook
• Brett H

  July 2017

  So many LOLz.... it must be to accomodate a 50mm drain so you can finally have good coffee in the shower!

  Share on Facebook
• askthecoffeeguy

  July 2017

  is it for revrouting from a vibrational to a rotary pump ? p

  Share on Facebook
• K_Bean_Coffee

  July 2017

  on 1501321483:

  is it for revrouting from a vibrational to a rotary pump

  Nope... I suppose it's best to leave the skin on K Bean - Buyer's Guide

  Share on Facebook
• K_Bean_Coffee

  January 2018

  on 1501232803:

  I was just unpacking an ECM Synchronika and noticed some very creative cut-out shapes in the chassis. Does anyone want to guess what they are there for? I have no idea... K Bean - Coffee Machines

  Just noticed I left this one unanswered. Yes, correct above. It’s for storage of the blind filter. Mystery solved

  Share on Facebook
• Brett H

  January 2018

  That is one handsome machine.  If I was in the market for a DB again this would be on a very short list.

  Share on Facebook
• Simon

  January 2018

  on 1516347126:

  Just noticed I left this one unanswered. Yes, correct above. It’s for storage of the blind filter. Mystery solved

  Ohhhh well there ya go haha... yeah we were all quite puzzled at the time XD thanks for letting us know! Case cracked!

  Share on Facebook